1. <dd id="apc1a"></dd>
        <dd id="apc1a"></dd>

        <em id="apc1a"><acronym id="apc1a"><u id="apc1a"></u></acronym></em>
      1. <button id="apc1a"><acronym id="apc1a"></acronym></button>

        <em id="apc1a"></em>
        1. Coal chemical process systemLocation:HomeCoal chemical process system

          Ammonia valve

          • Technical Parameters
          • Installation Guide
          • Model Description
          • Download the document

          Ammonia is often used in oxygen, nitrogen, hydrogen, argon and other gases.
          These gases are normally stored in a dedicated high pressure gas.
          The gas pressure can be reduced to the range of the experiment by using the ammonia valve, then the gas input system can be controlled by other control valve.
          The high pressure cavity of the ammonia valve is connected with the cylinder, the low pressure cavity is the gas outlet, and the access system is used.
          The value of the high pressure gauge is the pressure of the cylinder to store the gas.
          Outlet pressure of low pressure gauge can be controlled by adjusting screw rod.

          standard

          Type: check valve, globe valve, ball valve, reducing valve
          Size: DN15 ~ 400mm
          Level of pressure: ANSI 150lb ~ 300lb
          For adapt the temperature: - 40 ℃ ~ 150 ℃
          Body material: carbon steel and stainless steel
          Cover: Babel alloy, teflon, nylon
          Operation mode: manual, gear drive, electric, pneumatic

          Range of application

          Applicable to chemical, petroleum, food, smelting, liquid gas

          Media: pipeline of ammonia, ammonia liquid medium and liquefied gas pipeline

          Products

          General valve
          Special valves
          Control valve
          Valve industry

          1. <dd id="apc1a"></dd>
              <dd id="apc1a"></dd>

              <em id="apc1a"><acronym id="apc1a"><u id="apc1a"></u></acronym></em>
            1. <button id="apc1a"><acronym id="apc1a"></acronym></button>

              <em id="apc1a"></em>